About us
One way Clutches
   Slip Clutches    (Torque Limiters)
One way hinges
  Powdered Sintered  Metal Parts
Ball Screw
Ball Bearing
Linear Guide
Polyurethane rubber rollers(PU roller)
Contact us

One way hinges    



  • Compact, thin and high-torque, the width is 13mm for 0.1 to 1.0N.m type (0.88 to 8.85 lbf.in) or 19mm for 1.0 to 3.0N.m type (8.85 to 26.55 lbf.in); therefore, it requires minimum mounting space.
  • It has a small width but with a high torque which has achieved a minimum mounting space.
  • Free Stop capable of stopping a lid at any position and supporting its load.It is able to keep the lid hold up at any position with a certain torque and doesn't fall down.
  • Operation condition: 
  • -0.5˚C to +60˚C, 90%RH
  • Not easily affected by environmental conditions.
  • The wide range of the working condition is avaibale from -5C to +60C with 90%RH.
  • Wide to torque setting range
  • A standard setting torque is from 0.1 to 3.0N.m (0.885 to 26.55lbf.in)by an increment of 0.1N.m(1lbf.in). units within the range.
  • Standard torque is set from 0.1 to 3.0N.m by 0.1N.m each step, which provides a wide range of torque.
  • Two directions are available:  L and R, are available in terms of torque generation direction.
  • Easy mounting:
  • 2 general types of shapes are available: a standard type and a flange type. Usage depends on the mounting conditions requirement.
  • 1 special type is the bracket type, available for special requirement.


          Comparision with oil damper




Powered by Aim 網頁設計公司, Web Design, SEO Company